Halopriming imparts tolerance to salt and PEG induced drought stress in sugarcane

Sugarcane, a glycophyte grown in the tropical and subtropical regions, is frequently subjected to soil salinity, affecting the yield and quality of the harvest. The ameliorative efficiency of salt priming on emergence and plantlet growth was examined in sugarcane cultivars which are known to vary in salt tolerance under field conditions. Salt priming with NaCl (100 mM) improved both the percent and rate of germination of the sets of the tolerant (Co 62175) and moderately tolerant (CoM 265) varieties compared to sensitive (CoC 671) and test variety (Co 86032). Salt priming during germination also improved the growth performance of two-month-old sugarcane plants in terms of shoot length, shoot and root fresh weight when subjected to 15 day iso-osmotic (−0.7 MPa) NaCl (150 mM) or polyethylene glycol (PEG 8000; 20%, w/v) stress. The primed plants exhibited lower salt- and dehydration-induced leaf senescence. The results suggest salt priming as an efficient approach for imparting abiotic stress tolerance in sugarcane.     

Green energy generation through PEHF – a blueprint of alternate energy harvesting

In this work, an attempt has been made to harvest green energy from piezoelectric material using fluid flow in a conduit. Piezoelectric Energy Harvesting using Fluid Flow (PEHF) experimental model has been designed and the outputs obtained are compared with results obtained from simulations using ANSYS (computational fluid dynamics) and also with the mathematical modeling. The PEHF model has been utilized to analyze the effect of flow rate of water with reference to energy extracted. The full wave bridge rectifier and voltage doubler circuits have been used to obtain the direct current (DC) from the PEHF model. It is observed that the output obtained using experiments holds good in agreement with the results retrieved through simulations and mathematical results. The increase in flow rate of fluid leads to initially increase and then decrease in output of PEHF model as the maximum energy generated when flow rates (external force) matches with the frequency of excitation of the systems, i.e., at its resonance. The maximum energy output is generated at its resonance frequencies. It is observed that the full wave bridge rectifier circuit gives greater output as compared to a voltage doubler circuit.     

Identification and elucidation of anthropogenic source contribution in PM10 pollutant: Insight gain from dispersion and receptor models

Source apportionment study of PM₁₀ (Particulate Matter) in a critically polluted area of Jharia coalfield, India has been carried out using Dispersion model, Principle Component Analysis (PCA) and Chemical Mass Balance (CMB) techniques. Dispersion model Atmospheric Dispersion Model (AERMOD) was introduced to simplify the complexity of sources in Jharia coalfield. PCA and CMB analysis indicates that monitoring stations near the mining area were mainly affected by the emission from open coal mining and its associated activities such as coal transportation, loading and unloading of coal. Mine fire emission also contributed a considerable amount of particulate matters in monitoring stations. Locations in the city area were mostly affected by vehicular, Liquid Petroleum Gas (LPG) & Diesel Generator (DG) set emissions, residential, and commercial activities. The experimental data sampling and their analysis could aid understanding how dispersion based model technique along with receptor model based concept can be strategically used for quantitative analysis of Natural and Anthropogenic sources of PM₁₀.     

Uranium quantification in groundwater and health risk from its ingestion in Haryana,India

Uranium is a naturally occurring radioactive element which may cause toxicological or radiological hazards to the public if present in drinking water. This study reports the quantification of uranium in groundwater of major towns of the district Fatehabad, Haryana, India. Uranium concentrations ranged between 0.3 and 48 μg L^?1. In 22% of the groundwater samples, uranium concentrations were higher than the World Health Organization maximum permissible limit of 30 µg L^?1. The radiological dose for males was found to be in the range of 4.8?×?10^?4–7.1?×?10^?2 mSv y^?1 and for females 3.5?×?10^?4–5.2?×?10^?2 mSv y^?1. The results showed that due to the ingestion of groundwater in the study area, radiological cancer risk is in the range of 9.1?×?10^?7–1.3?×?10^?4, lower than the risk limit. Uranium ingestion from groundwater varied from 0.02 to 3.5 µg kg^?1 day^?1, which is within acceptable limit.     

Recent advancements in the challenges and strategies of globally used traffic noise prediction models

Environmental Science and Pollution Research - It is the need of an era to develop efficient traffic noise prediction models with optimum accuracy. In this context, the present work tries to...     

Nanomaterials photocatalytic activities for waste water treatment: a review

Water is necessary for the survival of life on Earth. A wide range of pollutants has contaminated water resources in the last few decades. The presence of contaminants incredibly different dyes in waste, potable, and surface water is hazardous to environmental and human health. Different types of dyes are the principal contaminants in water that need sudden attention because of their widespread domestic and industrial use. The toxic effects of these dyes and their ability to resist traditional water treatment procedures have inspired the researcher to develop an eco-friendly method that could effectively and efficiently degrade these toxic contaminants. Here, in this review, we explored the effective and economical methods of metal-based nanomaterials photocatalytic degradation for successfully removing dyes from wastewater. This study provides a tool for protecting the environment and human health. In addition, the insights into the transformation of solar energy for photocatalytic reduction of toxic metal ions and photocatalytic degradation of dyes contaminated wastewater will open a gate for water treatment research. The mechanism of photocatalytic degradation and the parameters that affect the photocatalytic activities of various photocatalysts have also been reported.

     

Fabrication of ZnO–SnO2 nanocomposite and its photocatalytic activity for enhanced degradation of Biebrich scarlet

Environmental Science and Pollution Research - The n–n-type ZnO–SnO2 nanocomposite was fabricated using malic acid following a simple one-pot co-precipitation method. The fabricated...     

Fluoride distribution in groundwater and survey of dental fluorosis among school children in the villages of the Jhajjar District of Haryana,India

Fluoride concentration of groundwater reserves occurs in many places in the world. A critical area for such contamination in India is alluvial soil of the plain region, consisting of five blocks (Jhajjar, Bahadurgarh, Beri, Matanhail, and Sahalawas) of the Jhajjar District adjacent to the National Capital Territory of India, New Delhi. The purpose of this study was to assess the association between water fluoride levels and prevalence of dental fluorosis among school children of the Jhajjar District of Haryana, India. The fluoride content in underground drinking water sources was found to vary in villages. Hence, the villages were categorized as high-fluoride villages (1.52–4.0 mg F/l) and low/normal-fluoride villages (0.30–1.0 mg F/l). The source of dental fluorosis data was school-going children (7–15 years) showing different stages and types of fluorosis who were permanent resident of these villages. The fraction of dental fluorosis-affected children varied from 30% to 94.85% in the high-fluoride villages and from 8.80% to 28.20% in the low/normal-fluoride villages. The results of the present study revealed that there existed a significant positive correlation between fluoride concentration in drinking water and dental fluorosis in high-fluoride villages (r = 0.508; p < 0.001) and insignificant correlation in low-fluoride villages.     

Techno-economic evaluation of ultrasound and thermal pretreatments for enhanced anaerobic digestion of municipal waste activated sludge

To enhance the anaerobic digestion of municipal waste-activated sludge (WAS), ultrasound, thermal, and ultrasound + thermal (combined) pretreatments were conducted using three ultrasound specific energy inputs (1000, 5000, and 10,000 kJ/kg TSS) and three thermal pretreatment temperatures (50, 70 and 90 °C). Prior to anaerobic digestion, combined pretreatments significantly improved volatile suspended solid (VSS) reduction by 29-38%. The largest increase in methane production (30%) was observed after 30 min of 90 °C pretreatment followed by 10,000 kJ/kg TSS ultrasound pretreatment. Combined pretreatments improved the dimethyl sulfide (DMS) removal efficiency by 42-72% but did not show any further improvement in hydrogen sulfide (H₂S) removal when compared with ultrasound and thermal pretreatments alone. Economic analysis showed that combined pretreatments with 1000 kJ/kg TSS specific energy and differing thermal pretreatments (50-90 °C) can reduce operating costs by $44-66/ton dry solid when compared to conventional anaerobic digestion without pretreatments.     

Abundance and diversity of the phyllosphere bacterial communities of Mediterranean perennial plants that differ in leaf chemistry

Summary.  We studied the epiphytic bacterial communities of the summer leaves of eight perennial species naturally occurring in a Mediterranean ecosystem. The species differ in essential-oil content (from rich in essential oil to non-producers) and composition, and also in life form (from herbaceous species to tall shrubs). We compared the epiphytic bacterial communities on the basis of (i) their abundance, (ii) their metabolic profile (derived by use of the BIOLOG Ecoplate system) and (iii) richness and diversity of substrates that they use, as a measure of functional diversity. Among all species, the aromatic Melissa officinalis was the most abundantly colonized. The bacterial communities on the leaves of the aromatic Myrtus communis, Calamintha nepeta and Melissa officinalis, and also of Cistus incanus catabolized all 31 substrates offered; those on the evergreen-sclerophyllous species, Arbutus unedo and Quercus coccifera, catabolized only 14 and 17 substrates, respectively. Carbohydrates were consistently used abundantly by all communities, whereas carboxylic acids were most variably used. On average, the group of aromatic plants scored higher regarding bacterial abundance, and richness and diversity of substrates used by the bacterial communities on their leaves; the lowest values for both substrate-use indices were recorded in A. unedo. Bacterial abundance or richness or diversity of substrates used did not vary with leaf oil content. Abundance was positively correlated with both substrate-use indices. Results support claims that the antimicrobial effects of essential oils are not exerted so much under natural conditions as reports based on biassays with pathogens usually show. Although essential oils play a part in the microbial colonization of the phyllosphere, it is not likely that inhibition of phyllosphere bacteria is essential oils’ primary role, at least in the Mediterranean environment.